Newsletter

Extron RGB 202 Plus MX/VS sn206077

Computer video interface for Projectors, Monitors, and Panels. Retired by Extron, this is an early model with 2 9 pin inputs and RGBHV output. In VVG condition, untested.
Availability: In stock
£21.35

Extron does not list this particular model on their website.   The information we do have has been gleaned from the RGB 202 Rxi, which has similar features.   One of the primary differences is that this unit does not route Audio signals.

 At the time of this posting, we were unable to fully test this unit, owing in part to a lack of suitable test signals, but all indications are that this unit functions perfectly.  

If you are interesested in the RGB 202 Plus, we'd be happy to answer any questions you might have prior to making a desision.

 

Specifications — RGB 202 Rxi
Video Routing .......................................... 2 x 1 router
Gain ............................................... 0.5 V to 1.45 Vp-p
Bandwidth .................................... 300 MHz (-3 dB)
Rise time ........................................ 1.5 ns
Video inputs  Number/signal type ................... 2 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 2 male 9-pin D for MBC/LBC cable or buffer
Nominal level ............................... 0.7 Vp-p for RGB
Minimum/maximum levels ...... Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected)
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 40 Hz to 140 Hz
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... 4 V
Video output Number/signal type ................... 1 analog RGBHV, RGBS, RGsB
Connectors .................................... 6 BNC female
Nominal level............................... 0.7 Vp-p for RGB
Minimum/maximum levels ...... 0.3 V to 1.30 Vp-p with 0.7 Vp-p nominal input level
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
DC offset ....................................... ±5 mV with input at 0 offset
Sync Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB
Input level ..................................... 2 V to 5.5 Vp-p with ±0.2 VDC offset max.
Output level ..................................
TTL: 4 V to 5 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Max. propagation delay .............. 85 ns
Max. rise/fall time ....................... 2 ns
Polarity .......................................... RGBHV: tracks polarity (or force negative sync via DIP switch) RGBS, RGsB: negative