Extron RGB 130xi sn534575033

Computer video interface for Projectors, Monitors, and Panels. Retired by Extron, this model has a 9 pin input, RGBHV output, with Audio. In Gd condition, untested.
Beschikbaarheid:: Op voorraad

Extron lists this Model as a  "Universal, Mountable Computer Interface with Audio and ADSP™"

At the time of this posting, we were unable to fully test this unit, owing in part to a lack of suitable test signals, but all indications are that this unit functions perfectly.  

If you are interesested in the RGB 130, or any of the Extron Interfaces on bibbteck.com, we'd be happy to answer any questions you might have prior to making a selection.

Here is the manufacture's Data:


Gain  Unity,: (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking
Bandwidth  300 MHz (-3dB)
Video input
Number/signal type  1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors  RGB 130xi, RGB 134xi: 1 9-pin D male
  RGB 160xi: 1 15-pin HD female
Minimum/maximum levels  Analog: 0.3V to 1.5V p-p with no offset at unity gain
Impedance  RGB 130xi, RGB 134xi: 75 ohms or Hi Z, switchable
  (set to 75 ohms if no local monitor is connected)
RGB 160xi  75 ohms
Horizontal frequency  Autoscan 15 kHz to 130 kHz
Vertical frequency  Autoscan 30 Hz to 120 Hz
Return loss  -30dB @ 5 MHz
Maximum DC offset  4.0V
Video output
Number/signal type  RGB 130xi, RGB 160xi: 1 analog RGBHV, RGBS, RGsB
  RGB 134xi: 2 analog RGBHV, RGBS, RGsB
Connectors  RGB 130xi, RGB 160xi: 6 BNC female
  RGB 134xi: 2 x 6 BNC female
  RGB 160xi: 1 15-pin HD female local monitor buffered output
Minimum/maximum levels  Analog: 0.7V to 0.75V p-p with 0.70V p-p input
Impedance  75 ohms
Return loss  -30dB @ 5 MHz
Input type  RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type  RGBHV (±), RGBS(±), RGsB (-)
Input level  2V to 5.5V p-p with ±0.2VDC offset (max.)
Output level  4V to 5V p-p
Input impedance  10 kohms
Output impedance  75 ohms
Max. propagation delay  48 nS
Max. rise/fall time  3.5 nS
Polarity  RGBHV: when RGBHV is input, polarity follows input;
  otherwise negative
RGBS, RGsB  negative
Gain  Unbalanced 0dB,: balanced +6dB
Frequency response  20 Hz to 20 kHz, ±0.05dB
THD + Noise  0.03% @ 1 kHz,: 0.3% @ 20 kHz at rated maximum output drive
S/N  >90dB, at the rated maximum output (14dBu), balanced
Stereo channel separation  >95dB @ 1 kHz to 20 kHz
Audio input
Number/signal type  1 PC level stereo, unbalanced
Connectors  1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
Impedance  >10 kohms, DC coupled
Maximum level  +8.5dBu,: (unbalanced) at stated %THD+N
Audio output
Number/signal type  1 stereo (2 channel), balanced/unbalanced
Connectors  1: 3.5 mm captive screw connector, 5 pole
Impedance  50 ohms unbalanced,: 100 ohms balanced
Gain error  ±0.1dB channel to channel
Maximum level (600 ohm)  >+14dBm, balanced at stated %THD+N
Power  100VAC to 240VAC, 50/60 Hz, 15 watts, internal, auto-switchable
MBC power jack  9.0VDC, 150 mA
Temperature/humidity  Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
  Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing
Rack mount  No
Furniture mount  Yes, with optional kits, #70-077-01 and #70-077-02
Enclosure type  Metal
Enclosure dimensions  
     RGB 130xi, RGB 160xi  1.75" H x 6.4" W x 6.0" D
  4.4 cm H x 16.3 cm W x 15.2 cm D
  (Depth excludes connectors.)
     RGB 134xi  1.75" H x 8.75" W x 6.0" D
  4.4 cm H x 22.2 cm W x 15.2 cm D
  (Depth excludes connectors.)
Product weight  RGB 130xi: 1.3 lbs (0.6 kg)
  RGB 134xi: 1.7 lbs (0.8 kg)
  RGB 160xi: 1.4 lbs (0.6 kg)
Shipping weight  RGB 130xi, RGB
  160xi: 3 lbs (1.4 kg)
  RGB 134xi: 4 lbs (1.8 kg)