Extron RGB 130xi sn534575033

Computer video interface for Projectors, Monitors, and Panels. Retired by Extron, this model has a 9 pin input, RGBHV output, with Audio. In Gd condition, untested.

Availability: Out of stock

Call for pricing

Qty:

Extron lists this Model as a "Universal, Mountable Computer Interface with Audio and ADSP™"

At the time of this posting, we were unable to fully test this unit, owing in part to a lack of suitable test signals, but all indications are that this unit functions perfectly.

If you are interesested in the RGB 130, or any of the Extron Interfaces on bibbteck.com, we'd be happy to answer any questions you might have prior to making a selection.

Here is the manufacture's Data:

Video
Gain	Unity,: (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking
Bandwidth	300 MHz (-3dB)
Video input
Number/signal type	1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors	RGB 130xi, RGB 134xi: 1 9-pin D male
	RGB 160xi: 1 15-pin HD female
Minimum/maximum levels	Analog: 0.3V to 1.5V p-p with no offset at unity gain
Impedance	RGB 130xi, RGB 134xi: 75 ohms or Hi Z, switchable
	(set to 75 ohms if no local monitor is connected)
RGB 160xi	75 ohms
Horizontal frequency	Autoscan 15 kHz to 130 kHz
Vertical frequency	Autoscan 30 Hz to 120 Hz
Return loss	-30dB @ 5 MHz
Maximum DC offset	4.0V
Video output
Number/signal type	RGB 130xi, RGB 160xi: 1 analog RGBHV, RGBS, RGsB
	RGB 134xi: 2 analog RGBHV, RGBS, RGsB
Connectors	RGB 130xi, RGB 160xi: 6 BNC female
	RGB 134xi: 2 x 6 BNC female
	RGB 160xi: 1 15-pin HD female local monitor buffered output
Minimum/maximum levels	Analog: 0.7V to 0.75V p-p with 0.70V p-p input
Impedance	75 ohms
Return loss	-30dB @ 5 MHz
Sync
Input type	RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type	RGBHV (±), RGBS(±), RGsB (-)
Input level	2V to 5.5V p-p with ±0.2VDC offset (max.)
Output level	4V to 5V p-p
Input impedance	10 kohms
Output impedance	75 ohms
Max. propagation delay	48 nS
Max. rise/fall time	3.5 nS
Polarity	RGBHV: when RGBHV is input, polarity follows input;
	otherwise negative
RGBS, RGsB	negative
Audio
Gain	Unbalanced 0dB,: balanced +6dB
Frequency response	20 Hz to 20 kHz, ±0.05dB
THD + Noise	0.03% @ 1 kHz,: 0.3% @ 20 kHz at rated maximum output drive
S/N	>90dB, at the rated maximum output (14dBu), balanced
Stereo channel separation	>95dB @ 1 kHz to 20 kHz

Audio input
Number/signal type	1 PC level stereo, unbalanced
Connectors	1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
Impedance	>10 kohms, DC coupled
Maximum level	+8.5dBu,: (unbalanced) at stated %THD+N
Audio output
Number/signal type	1 stereo (2 channel), balanced/unbalanced
Connectors	1: 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced,: 100 ohms balanced
Gain error	±0.1dB channel to channel
Maximum level (600 ohm)	>+14dBm, balanced at stated %THD+N
General
Power	100VAC to 240VAC, 50/60 Hz, 15 watts, internal, auto-switchable
MBC power jack	9.0VDC, 150 mA
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
	Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing
Rack mount	No
Furniture mount	Yes, with optional kits, #70-077-01 and #70-077-02
Enclosure type	Metal
Enclosure dimensions
RGB 130xi, RGB 160xi	1.75" H x 6.4" W x 6.0" D
	4.4 cm H x 16.3 cm W x 15.2 cm D
	(Depth excludes connectors.)
RGB 134xi	1.75" H x 8.75" W x 6.0" D
	4.4 cm H x 22.2 cm W x 15.2 cm D
	(Depth excludes connectors.)
Product weight	RGB 130xi: 1.3 lbs (0.6 kg)
	RGB 134xi: 1.7 lbs (0.8 kg)
	RGB 160xi: 1.4 lbs (0.6 kg)
Shipping weight	RGB 130xi, RGB
	160xi: 3 lbs (1.4 kg)
	RGB 134xi: 4 lbs (1.8 kg)

Extron RGB 130xi sn534575033

Extron DAV DAS MAAP Modules with Wall plate

Knox Video Model RS8x8 HB Router