Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
An early Pioneer reverb unit for adding reverb effects to recordings. A nice addition for your recording studio. Working, please see full description.
Parts from Crown International (yes that Crown) Model 700 and 800 series quarter inch decks. Head stack removed from an 800 series, model LL802. Windings tested for continuity only. See full description.
Parts from Crown International (yes that Crown) Model 700 and 800 series quarter inch decks. Head stack removed from an 800 series, model LL822. Windings tested for continuity only. See full description.
An early backup drive from a DAW setup. It runs, but we're unable to test it due to a lack of any cartridges. Sold with cable and SCSI terminator.
An early Japanese built battery powered recorder that is extremely low tech. It works, recommended for the collector. See full description..
An early Bozak stereo mixer with discrete electronics, Sealed Allen Bradley Pots, and transformer coupled mic preamps. Restored to full operating condition.
A Professional CD Player from Technics with Pitch, Search and excellent D>A converters. Very Good condition. SOLD.
A calibrated stereo meter pair, with balanced, loop through inputs, variable range settings, 2 rack units high. Very good condition.
This is an early version of the classic B15, and it used a 2 piece baffle arrangement, with 8 vent slots feeding a short labyrinth. Local Pickup Only. Chassis photos available on request.
Two Arria control surfaces, Zaxcom DMX, Arria DAM, BNC to db25 panel, Monitor and status panels. Please see full description. Shipping disabled for this item, please call or email.
Quarter inch, 4 track deck, an early version from Teac/Tascam with front panel access to alignment controls. Local pickup only.
VOX model 95-910511, made in Italy for the Thomas Organ co. Has the Trash Can inductor.
Has seen some use, works well.
Rackmount version of Denon's DN-720, good condition. Tested and working.
A late model Tascam 122 MKIII with the balanced audio option, very low hours, some scratches to the top of the front plate.
Motorola TIP147 PNP Darlington transistors, Priced per Pair.
MJ10005 high speed, power switching in inductive circuits where fall time is critical. They are particularly suited for line operated switch-mode applications. Priced per pair.
Emulator I, the 1st version of Emulator Systems Emulator line, a 4 Octave Keyboard sampling synthesizer, 500 were manufactured in 1982. Local Pickup Only. This Unit will not load any programs. Read full description.
Digital Audio Receiver with AES EBU I/Os, includes a 1RU Control Panel with Thumbwheel Setting.
In Excellent condition, Untested by bts, sold AS IS.
Professional dubbing deck, 3 heads, direct drive capstan. Very clean, with low hours. SOLD OUT.
Early wireless mic receiver from Vega (no transmitter). This unit is in excellent condition cosmetically except for the top of the case. Please read full description.
The metal horn and magnet from a Cerwin Vega 1" High Frequency driver. No diaphragm, or assembly hardware.
A 1" phenolic dome replacement for a Cerwin Vega horn. This is NOS, unused diaphragm, in original packing. No specifications were available at the time of this posting.
A Cerwin Vega Horn tweeter with a 1" phenolic dome. This unit works, but is being sold for parts. No specifications were available at the time of this posting.
Removed from Edit and Production facility, these panels have a harness from the Jack Field to the QPC punch panel. Normals are accessed at the Jack Field.
Precis PR-0804 8x4 RGBHV Switcher with Balanced Stereo Audio, Very good condition.
A combination Spring tank reverb, tape delay echo unit with Microphone/Instrument and Line Level inputs. VERY clean, with new Maxell UD tape loop. SOLD OUT.
Vintage mid 1950s 12" RCA speakers, AlNiCo magnets, sold as a pair, Date code indicates 1955 and 1950 as probable years of manufacture.
Vintage mid 1950s 12" BiAxial RCA speaker with 3" Hi Frequency driver. AlNiCo magnet, only one available. Date code indicates 1957 as year of manufacture.
A pair of cabinets with baffles for 12" drivers, made from solid Honduras Mahogany, deep cherry stain. Very good condition, no drivers in these cabinets.
An AKG Long Shotgun microphone, just tested with a 451 capsule and works fine. Good cosmetics.
MDM-TA3 Mix Down Monitors by Ed Long's Calibration Standard Instruments of Oakland, CA. Very Good condition. Price is per pair.
Produced in the early 50s by Brush Development, one in a line of crystal microphones designed for commercial use.
The Original electro-harmonix DELUXE Big Muff π Effects Pedal that combines Fuzz, Compression, Sustain efx. Not a reissue.
AC Powered, in original box, not NOS but close.
Otari CB-110 remote control with 30' cable, good condition, fully tested and working.
A pair of 10 inch coaxial drivers, removed from Akai model SS-1210 cabinets. VG condition, tested, working, priced per pair.
Standard, balanced Bantam cables, with brass plugs.
Priced Per Cable
A computer controlled midi graphic equalizer, balanced I/Os, very good condition.
The Aphex Type E (Entertainer series) is a mono 1/2 rack unit, with front panel Foot switch and Hi Impedance input. This unit is in fair cosmetic condition, works well.
The Aphex Type E (for Entertainer series) is a mono 1/2 rack unit, with front panel Foot switch and Hi Impedance input. This unit is in fair cosmetic condition, works well.
Sony MiniDisc, 2002 model, works well, Loading drawer mechanism with new belt. Good cosmetics.
SV-3700 DAT with rack mount kit, good condition, sn AA1BA02410. Early version, works well.
A 50s era mono amplifier from the estate of a local RCA engineer. Being sold without tubes, all original construction. Untested, as is.
This interface allows Edit control over Otari Reel decks using the Fostex 4030/4035 Editing system. It has a 34 Pin cable attached that connects to Otari's Locator Port.
For any setup requiring VTR or ATR Chase of another deck, the Fostex system provides solid sync between formats using a number of sources. The 4035 provides Edit control functions over various Fostex devices.
Monitor panels used with Autopatch Systems.
All worked when removed, Untested, sold AS IS.
These have been removed from an Ampex 350 1/4" Deck plate. They have studs for mounting to the deck. Good condition, see notes.
Ampex 350 EOT Arm assembly, removed from an Early Model 350 deck. Good condition, see notes.
Removed from a pair of Wurlitzer Model 62 Tone cabinets. Good condition, untested. Price is for the PAIR.
Provides +4 dbm, Balanced outputs for your consumer level sources. Very quiet, lo THD with 10 turn pots for each output. Great for studios using Legacy Tape, VTR, or Tascam 8 Track Reel to Reel tape decks.
dbx Digital Processor does it all: Limiter/Compressor/De-Esser/Expander/Gate and Parametric Equalizer with dbx Type IV conversion. In Excellent condition.