Fostex 4035 Synchronizer Controller

The Fostex 4035 control panel draws power from a Fostex Synchronizer (4030, etc.) and has a number of LED Indicators and counters for the Master and 3 Slaves.  It also provides the usual Edit Control functions, such as Chase, Frame/Sync Lock, Time Code, FF, Rew,etc.   This 4035 was tested using a Fostex 4030.  All of the displays are working with no bad segments, etc.  Overall the condition of the 4035 Controller is VVG.

Please Note: There is a small scratch in the plastic just below the main display on the 4035.  See the last photo.

Specifications for the 4030:

• Typical lock-up time rate: 5 secs. from stop
• Lock-up rate: 1/2 ~ 2 times of play speed
• Time-code signal: SMPTE 30 F.P.S., SMPTE Drop Frame, EBU 25 F.P.S. and Film 24 F.P.S.
• Level: 100mV p-p ~ 10V p-p
• Read Speed Range: 1/2 ~ 2 times
• Machine status: Play, Stop, F.Forward, Rewind, Record
• Communication Bus: Quasi-RS232C, DIN 8 connector
• Controller I/O: 30 pin flat cable connector
• Power: 85 ~ 132V AC, 50/60Hz, 12W